Mon panier
Multidiag Access J2534 2018.9 MB SD C4/C5 Autel Maxicom Xtool Pad2 V2018 FVDI ABRITES Commander
maison
A la maison - Produits - Programmateur Calculateur Auto - 【8ème Anni】 KTM FLASH KTMflash ECU Programmer Transmission Powerful Upgrade Tool Supporte V-A-G DQ200 DQ250 Infineon Bosch and 271 MSV80 MSV90
« Go Back

【8ème Anni】 KTM FLASH KTMflash ECU Programmer Transmission Powerful Upgrade Tool Supporte V-A-G DQ200 DQ250 Infineon Bosch and 271 MSV80 MSV90

Item No. :SE140
En Stock
Achat immédiat (1 pcs):€265.00 
quantité:
  
Eobdii.fr 8th Anniversary Second Wave

Prix spécial Promo

Valid Time:19th-30th Sep
Livraison:
    Livraison Express Service 
Le délai de livraison estimée: 3-5 Jours. Détails»
poids:
472g
paquet:
28.5cm*18cm*7cm        ( Inch: 11.22*7.09*2.76 )
retour:
Retour de remboursement dans les 7 jours, l'acheteur paie les frais de retour.Détails»
Share |
KTM flash Read the chip data, read and write ECU data, read transmission data etc, the speed is very fast.
KTM Flash ECU Programmer & transmission Powerful Upgrade Tool 
 
Read the chip data, read and write ECU data, read transmission data etc, the speed is very fast.
 
 Highlights of KTMflash Programmer
 
1.Workable Transmission Model
 
2.Read Chinese car via OBD
 
3.Read BOOT mode according to the chip model
 
4.Read the encrypted ECU password (Read the password of encrypted ECU first, then read data)
 
Support Chinese car ME17 TC1728/1767 data reading & writing and password reading

Engineer Sugguestions 
 
1.Just use our software, no others
 
2.Please make sure there is no other ECU flash software or the device will be locked.No internet also 
 
3.There is a software and instruction in the CD, also attached with operation video to follow
 
4.KTMflash is mainly on reading Infineon ECU and Gearbox [Transmission]ecu.
 
5.Before reading Infineon or ECU,please read unlock file.If the software shows"turn off power for 2 seconds"
make sure the power is turn off for over 2 seconds,if not, the message will show again till the time is enough 

6.Please choose laptop with Intel CPU.If choose laptop with AMD CPU,only test the device one time
 
Workable Transmission Model:
 
V-A-G: DQ200 (0AM) 
V-A-G: DQ200MQB/G2 (0CW) 
V-A-G: DQ250C (02E) K-Line 
V-A-G: DQ250E/F (02E) 
V-A-G: DQ250MQB (0D9) 
V-A-G: VL300/V30 (01J/0AN) K-Line 
V-A-G: VL300/V30 (01J/0AN)
V-A-G: VL381 (0AW) 
V-A-G: DQ500 (0BH/0BT) 
V-A-G: DL501/G2 (0B5) 
V-A-G: DQ200/MQB Boot (MICRO) 
V-A-G: DQ200/MQB Boot (EEPROM) 
V-A-G: DQ200G2 Boot (MICRO) 
V-A-G: DQ200G2 Boot (EEPROM) 
V-A-G: DQ250E/F/MQB Boot (MICRO) 
V-A-G: DQ250E/F/MQB Boot (EEPROM) 
V-A-G: VL300/V30 BSL (FLASH)
V-A-G: VL300/V30 BSL (EEPROM) 
V-A-G: VL381 Boot (MICRO) 
V-A-G: VL381 Boot (EEPROM) 
V-A-G: DL501 Boot (MICRO) 
V-A-G: DL501 Boot (EEPROM)
V-A-G: DL501G2 Boot (MICRO) 
V-A-G: DL501G2 Boot (EEPROM)
 
Read Chinese car via OBD:
 
China: Chery, Great Wall, Lifan, SAIC ME17 (ME17.8.8) 
China: Chery, Great Wall, Lifan MT80 K-Line Calibration (Delphi MT80)
China: Chery, Great Wall, Lifan MT80 CAN-bus (Delphi MT80)
 
Read BOOT Mode According to the chip model:
 
Infineon: TC1762/TC1766 MICRO (1504KB) 
Infineon: TC1762/TC1766 EEPROM (32KB) 
Infineon: TC1792/TC1796 MICRO (2048KB) 
Infineon: TC1796 MICRO+EXT (4096KB/6144KB) 
Infineon: TC1796 EXT (2048KB/4096KB) 
Infineon: TC1796 EEPROM (128KB) 
Infineon: TC1792 EEPROM (64KB) 
Infineon: TC1738/TC1767 MICRO (2048KB)
Infineon: TC1738/TC1767 EEPROM (64KB) 
Infineon: TC1797 MICRO (4096KB) 
Infineon: TC1797 MICRO+EXT (6144KB/8192KB)
Infineon: TC1797 EXT (2048KB/4096KB) 
Infineon: TC1797 EEPROM (64KB) 
Infineon: TC1724/TC1728 MICRO (1536KB)
Infineon: TC1724/TC1728 EEPROM (64KB) 
Infineon: TC1782/TC1784 MICRO (2560KB) 
Infineon: TC1782/TC1784 EEPROM (128KB) 
Infineon: TC1793/TC1798 MICRO (4096KB) 
Infineon: TC1793/TC1798 MICRO+EXT (6144KB/8192KB) 
Infineon: TC1793/TC1798 EXT (2048KB/4096KB) 
Infineon: TC1793/TC1798 EEPROM (192KB) 
 
Read the encrypted ECU password (Read the password of encrypted ECU first, then read data):
 
Bosch: Support Chinese car ME17 TC1728/1767 data reading & writing and password reading
Bosch: BMW/MB/V-A-G GPT 
Bosch: Ford/Opel/Volvo GPT 
Bosch: BMW TPROT8+ 
Bosch: V-A-G TPROT8+ 
Bosch: Kia/Hyundai/Honda TPROT8+ 
Bosch: Chrysler/Jeep/Dodge/Fiat TPROT8+ [Test] 
Bosch: VAZ/UAZ ME17.9.71  
Continental: Kia/Hyundai/SsangYong SIM2K-24X/C201 
Continental: Ford EMS2204
Continental: Ford EMS2207 
Continental: Ford EMS2211
Continental: Ford SID208 
Continental: Ford SID209 
Continental: Ford Mondeo 4 SID807EVO
Continental: Ford Focus 3/Transit Connect SID807EVO 
Continental: Citroen/Peugeot SID208 
Kia/Hyundai: Delphi MT86 EEPROM (16KB) 
Mercedes-Benz: Delphi CRD3.1 EEPROM (32KB) 

How to use KTM FlASH ECU programmer Switch board? 
 
1. The switch board is designed to work with J2534, this device uses the Ktag cables so the user can refer to the Ktag wiring diagram. 
 
2. Advise you use Open Port2.0 as the protocol conversion equipment and work with PC.
 
3. There are 3 types of Bosch Infineon ECU : 
 1) The Infineon ECU before TPROT8.
 2) TPROT8-10 
 3) The Infineon ECU after TPROT10 which is what we call GPT encrypted. 
 
4. The Infineon ECU before TPROT8 is not encrypted, you directly uses the BOOT point 
grounding, then follow the Ktag user manual to wire the cable and read the data. 
 
5.For TPROT8-10,the Bosch Company set the anti-debugging mode, reading EEPROM needs no password and reading Flash needs password. 
 Therefore, during the reading process, there is an extra CNF1, Boot outputs low level and CNF1 outputs high level. When reading, Boot needs to add one small resistor and ground it. CNF1 to connect one 470ohm-2K resistance, then connect 3.3V, it's very important, otherwise the ECU will be burnout. 
2 tips on reading the data: 
 1) BOOT and CNF1 must be connected when reading data. 
 2) Only connect BOOT not CNF1 When reading the password, otherwise the password can't be read out. Also you can follow the Ktag wiring diagram because Ktag controls the CNF1 turn on and off, so it can't be disconnected. When reading the password, you turn the two switches to the automatic mode, and to the On mode when reading the data, when the software prompts, you choose " Manually" then follow the message to turn on or off.
 
6. For GPT encrypted ECU, the S1, S2 and Boot cable are needed to connected when reading password, and the S1, S2 don't need to be connected when reading data.
 
 
Package includes:
 
1pc x KTMflash ECU Programmer
1pc x KTMflash USB Dongle

KTMflash Software Display

ktmflash software display
ktmflash software display
ktmflash software display
ktmflash software display
ktmflash software display
ktmflash software display

Contact information:

Phone Number: 86-13437108384

E-mail:Sales@EOBDII.fr

Skype:sales@eobdii.fr

Whatsapp: 86-13437108384



Avis: Avant de faire la commande sur mon site, s'il vous plaît enregistrer votre compte paypal pour protéger la transaction.


Quel est le sens de QC marque sur produit?

1. Le QC marque signifie que ce produit a passé letest de notre ingenieur.
2. Le QC marque signifie que le produit est de notre société.
3. Le QC marque signifie que le produit obtiendra la garantie.

Attention les risques viennent de la douane:

Les colis DHL envoyés vers l'outre-mer de la france (Martinique, Réunion, Guadeloupe etc. ) ont peut-être des frais de douane, merci de votre compréhension.

Donnez votre avis

* Classment:
    Sélectionner les étoiles de la classification svp.
* Votre prénom et nom:
* Votre E-Mail:
* Détails:
Dites-nous ce que vous pensez de cet article et partagez vos opinions avec d'autres personnes. S'il vous plaît vous assurer que votre avis ne porte que sur ce point. Tous les commentaires sont modérés et seront réexaminées dans un délai de deux jours ouvrables. commentaires inappropriés ne seront pas affichés.
Après questions-vente et questions: Contactez notre Service Clientèle. (Un représentant clientèle vous contactera pour vous).
S'il vous plaît Inscrivez-vous en premier si vous voulez plus tard modifier ou gérer les commentaires transféré par vous-même.
Il Marquer